Swistar | X-BOARD Lite

Anketa

Preferujete lité (coatované) bannery více než laminované?

Autorizovaný distributor XANITA

jvilaseca

X-BOARD Lite

XB Print EN Lite

X-Board Lite is an eco-friendly and cost-effective open-cell honeycomb board, ideal for flat-panel (2D) or selected three-dimensional (3) applications.

X-BoardLite™ is an expanded honey comb core (EHC), pressed between a print-receptive laminate. Like the entire X-Board™ range, it boasts outstanding eco credentials. X-Board Lite™ is manufactured from post-consumer paper and sugar cane wastes and is fully recyclable and repulpable after use. It is VOC-free and contains no polyethylene or waxes. X-Board Lite™ is a lower cost alternative to corrugated honeycomb core (CHC), medium-density fibre board (MDF) and chipboard in flat (2D) panel applications. It is an environmentally responsible replacement for Acrylonitrile Butadiene Styrene (ABS) and foam boards. X-Board Lite™ can be direct-printed, upholstered, laminated, veneered, pressed with decorative foils or painted. It can be mitre cut, folded or curved, shape cut, photo-mounted and fastened with Velcro, hot-melt adhesive or magnetic strips...the possibilities are only limited by your imagination.

XB structure EN

»Recommended application
X-BoardLite™ is suitable for flat-panel (2D) or selected three-dimensional (3) applications.
»Manufacturing and testing conditions
The products are manufactured under stringent manufacturing processes and Quality Control conditions. Product testing and development are conducted in accordance with International quality standards.
»Product properties
  • Appearance
    The surface of the material is free of blisters, foreign matter, marks, etc. The color and finish is a commercially acceptable match to the customer approved master sample.
  • Printability characteristic
    • Printable on both sides.
    • Both sides show the same visual surface properties as well as print performance.
    • Excellent printability: solvent, screen, UV digital and screen.
  • Product attributes
    • Excellent rigidity and stability under representative indoor humidity and temperature fluctuations.
    • Excellent condensate and moisture hold out under varying conditions.
  • Environmental attributes
    • All components are classified as non-hazardous according to the EEC HAZARD CLASSIFICATION.
    •All components are not considered as chemical or biological hazards.
    • No volatile carcinogenic decomposition.
    • VOC (volatile organic compound) none to negligible – none less than 5ppm (parts per million).
    • All components have supplier certification of repulpability.
    X-Board Lite™ is classified as fully re-pulpable in normal paper and pulping lines.
    • Certified as repulpable.
    • Honey comb core consists of 97% post-consumer fibre waste.
  • Classification of fire behavior
    • SANS10177 approved.
    • No toxic fumes when burned.
    • Non-explosive.
    • Low fire load rating based on low calorific value when burning.
  • Converting and application specifications
    • Recommended application temperature range: 5º C and 45º C.
    • Recommended room temperature for CNC cutting: 21º C ±3º C.
     
  •  Board Sizes
    • Typical (most commonly used ) format in our warehouse is 122cm x 290cm

  Thickness
  122cm x 244cm
  122cm x 360cm
  Other Lengths
  
  (Minimum)
  (Maximum)   (Special)
  10mm
  Yes
  Yes   On request
  16mm
  Yes
  Yes   On request
  Other thickness
  On request
  On request
  On request

*   Minimum indoor durability is 36 months.

  • Product physical properties
     
  Property
  Test Mode
   Result
   Result
  10mm   16mm
  Weight(kg/m2)
  Scale
  1,4   1,6
  Crush strength(ton/m2)
  ASTMC473-03
  50   40
   Flexural strength(kg)
  ASTMC473-03
  35
  50

Note: values above represent average values obtained.

 Property
 Test Mode
 Result
Low temperature resistance
Exposure to-5ºC for 48hours.
No visible changes
High temperature resistance
 Exposure to 60ºC for 48hours.
No visible changes
Humidity resistance(kg)
ASTMC473:Vertical exposure in humidity cabinet for 48 hours 90% humidity and 40ºC
No visible changes, deformation, warping, swelling or fungi growth.
  • Documentation
    This specification is based on Xanita Research & Development expertise and results researched during the development of the X-Board Lite™ product.
V košíku není žádné zboží

SWISTAR.cz

akce právě probíhá ...

xxxxxxxxx