Swistar | X-BOARD Kraft

»Product description

A high strength low weight kraft based composite board suitable for internal use emphasizing its pure ecological origin. Specialized coatings and exceptional internal-fibre properties ensure optimum board stability. 

»Recommended application

»Manufacturing and testing conditions

The products are manufactured under stringent manufacturing processes and Quality Control conditions. Product testing and development are conducted in accordance with International quality standards.

»Product properties

1. Appearance
   The surface of the material is free of blisters, foreign matter, marks, etc. The color and finish is a commercially acceptable match to the customer approved master sample.
2. Printability characteristic
   • Not recommended for digital pribting.
   • Both sides show the same visual surface properties.
   • Limited printability: screen spot colors, UV digital but with white backgroung color.
   
3. Product attributes
   • Excellent rigidity and stability under representative indoor humidity and temperature fluctuations.
   • Excellent condensate and moisture hold out under varying conditions.
   
4. Environmental attributes
   • All components are classified as non-hazardous according to the EEC HAZARD CLASSIFICATION.
   • All components are not considered as chemical or biological hazards.
   • No volatile carcinogenic decomposition.
   • VOC (volatile organic compound) none to negligible – none less than 5ppm (parts per million).
   • All components have supplier certification of repulpability.
   • X-Board Print™ is classified as fully re-pulpable in normal paper and pulping lines.
   • Certified as repulpable.
   • Honey comb core consists of 97% post-consumer fibre waste.
5. Classification of fire behavior
   • B3 as per DIN 4102.
   • No toxic fumes when burned.
   • Non-explosive.
   • Low fire load rating based on low calorific value when burning.
   
6. Converting and application specifications
   • Recommended application temperature range: 5º C and 45º C.
   • Recommended room temperature for CNC cutting: 21º C ±3º C.
    

7.  Board Sizes
   • Typical (most commonly used ) format in our warehouse is 122cm x 290cm

Thickness	122cm x 244cm	122cm x 360cm	Other Lengths
	(Minimum)	(Maximum)	(Special)
10mm	Yes	Yes	On request
16mm	Yes	Yes	On request
Other thickness	On request	On request	On request

^{*   Minimum indoor durability is 36 months.}

8. Product physical properties
    

Property	Test Mode	Result	Result
		10mm	16mm
Weight(kg/m2)	Scale	1,86	2,4
Crush strength(ton/m2)	ASTMC473-03	90	90
Flexural strength(kg)	ASTMC473-03	21 /28	39 / 44
Nail pull resistance(kg)		21	21

^{Note: values above represent average values obtained.}

Property	Test Mode	Result
Low temperature resistance	Exposure to-5ºC for 48hours.	No visible changes
High temperature resistance	Exposure to 70ºC for 48hours.	No visible changes
Humidity resistance(kg)	ASTMC473:Vertical exposure in humidity cabinet for 48 hours 90% humidity and 40ºC	No visible changes, deformation, warping, swelling or fungi growth.

9. Documentation
   This specification is based on Xanita Research & Development expertise and results researched during the development of the X-BoardPrint™ product.